[cisco-voip] gw 2811 with sw port module

[James Grace]

We have a gw with sw port module and we are putting ip phones it the ports.
The port are config as 

Int fa 1/0 

Sw acc vlan 10 

Sw mod trunk 

Sw voice vla 20 

 

Now when like this the the pc connected to ip phone port has no ip
connectivity but the ip phone works fine 

If I remove the sw mod trunk   the pc work fine but they have to be direct
connected to switch module 

 

 

 

James D. Grace 

CCNP CCNA MCSE MCDBA

Sr. System Engineer / Professional Svc.

Digitel Corporation

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060105/6d09835e/attachment.html