[cisco-voip] Group FXO ports for dial-peers

[Kris Seraphine]

Hi

I'm configuring an H.323 gateway for a remote site in a CallManager
4.13cluster.  This particular site has 12 analog lines in a hunt group
for PSTN
access.  I generally configure separate dial-peers for local, longdist,
international and emergency calls so I can minimize interdigit time out and
encorce COR in SRST.  This will work out to be over 60 dial peers in this
case.

Is there a way to point a POTs dial peer to a group of ports so I can reduce
the number of dial-peers?  I briefly looked at the trunk-group voice-port
and dial-peer commands but they do not seem to work for what I'm looking to
do (or I just didn't have the configuration right).

Any suggestions are appreciated.

--
kris seraphine
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060109/5ace1f25/attachment.html