[cisco-voip] Duplicated DN name problem

[Alan Su]

Dear All,

I have a weird problem here:
I need to add one specific number into router pattern (ex: 1648), and let
CCM to route this call to remote site. But when I input the 1648 in route
pattern/hunt pilot field, it shows the message "There is already an existing
DN or pattern using the selected Partition, Route Filter combination" (as
attachment). And I check the DN list, route pattern, route filter,
partition.... etc., there is no this number existing. I try to use 164[8],
then it works !!! Does anybody have same problem or know how to fix this ?
Many many thanks for any opinion.



Regards/Alan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060110/6b4c2828/attachment.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: snap.jpg
Type: image/jpeg
Size: 12517 bytes
Desc: not available
Url : https://puck.nether.net/pipermail/cisco-voip/attachments/20060110/6b4c2828/snap.jpg