[cisco-voip] Duplicated DN name problem

[Kevin Thorngren]

Sounds like that DN has been assigned to a device previously and that 
device has been deleted.  In this case the DN is not deleted from the 
DB but is labeled as unassigned.  Go to CCMAdmin > Route Plan > Route 
Plan Report.  Select "Unassigned DN" in the Find pull down.  Perform a 
search for the DN 1648.  You can select it from the search results and 
Delete it.  Now you will be able to add the pattern.

Kevin
On Jan 10, 2006, at 4:04 AM, Alan Su wrote:

> Dear All,
>  
> I have a weird problem here:
> I need to add one specific number into router pattern (ex: 1648), and 
> let CCM to route this call to remote site. But when I input the 1648 
> in route pattern/hunt pilot field, it shows the message "There is 
> already an existing DN or pattern using the selected Partition, Route 
> Filter combination" (as attachment). And I check the DN list, route 
> pattern, route filter, partition.... etc., there is no this number 
> existing. I try to use 164[8], then it works !!! Does anybody have 
> same problem or know how to fix this ? Many many thanks for any 
> opinion.
>  
>  
>  
> Regards/Alan<snap.jpg>_______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip