[cisco-voip] QSIG CallForwardAll between PBX-IP phones fails
Ruben Montes
Ruben.Montes at eu.didata.com
Tue Jan 10 12:29:02 EST 2006
It's an ISO QSIG. I haven't tried with H323. Do you think H323 will fix
that?
It's not a CSS issue, I'm sure about that.
Regards,
Ruben
-----Mensaje original-----
De: Voll, Scott [mailto:Scott.Voll at wesd.org]
Enviado el: martes, 10 de enero de 2006 18:19
Para: Ruben Montes; cisco-voip at puck.nether.net
Asunto: RE: [cisco-voip] QSIG CallForwardAll between PBX-IP phones fails
Do you know what version of Qsig? ISO, ECMA? Have you tried this via
H323?
Is it a calling Search Space issue? Can the caller call the second
phone directly?
Scott
-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ruben Montes
Sent: Tuesday, January 10, 2006 8:53 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] QSIG CallForwardAll between PBX-IP phones fails
Hello,
I have a CCM 4.1(3)SR2 cluster connected through a router 2851 with a
MGCP PRI QSIG with an Ericsson MD110.
If I have an IP phone forwarded to another IP phone, and I try to call
the first one from an analog phone that should go across the QSIG, call
rings for a second in the final phone and the hangs.
Any idea?
Debug isdn q931
Jan 10 12:29:26: ISDN Se0/0/1:15 Q931: RX <- SETUP pd = 8 callref =
0x7400
Sending Complete
Bearer Capability i = 0x8090A3
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA18392
Preferred, Channel 18
Progress Ind i = 0xA190 - Reserved value
Calling Party Number i = 0x0181, '659457184'
Plan:ISDN, Type:Unknown
Called Party Number i = 0xC9, '48810'
Plan:Private, Type:Subscriber(local)
User-User i = 0x00FE, 'U', 0x0100, 'Y', 0x0100B4
Shift to Codeset 5
Codeset 5 IE 0x31 i = 0x81
Shift to Codeset 5
Codeset 5 IE 0x32 i = 0x80
Jan 10 12:29:26: ISDN Se0/0/1:15 Q931: TX -> CALL_PROC pd = 8 callref =
0xF400
Channel ID i = 0xA98392
Exclusive, Channel 18
Jan 10 12:29:26: ISDN Se0/0/1:15 Q931: TX -> FACILITY pd = 8 callref =
0xF400
Facility i =
0x9FAA068001008201008B0100A115020101020114300D0A01010A010280053438383131
Jan 10 12:29:26: ISDN Se0/0/1:15 Q931: TX -> ALERTING pd = 8 callref =
0xF400
Facility i =
0x9FAA06800100820100A114020101020101800C527562656E204D6F6E746573
Progress Ind i = 0x8088 - In-band info or appropriate now
available
Jan 10 12:29:26: ISDN Se0/0/1:15 Q931: RX <- STATUS pd = 8 callref =
0x7400
Cause i = 0x81E41C - Invalid information element contents
Call State i = 0x03
Jan 10 12:29:26: ISDN Se0/0/1:15 Q931: TX -> DISCONNECT pd = 8 callref
= 0xF400
Cause i = 0x80E2 - Message not compatible with call state or not
implemented
Jan 10 12:29:26: ISDN Se0/0/1:15 Q931: RX <- STATUS pd = 8 callref =
0x7400
Cause i = 0x81E41C - Invalid information element contents
Call State i = 0x04
Jan 10 12:29:26: ISDN Se0/0/1:15 Q931: RX <- RELEASE pd = 8 callref =
0x7400
Cause i = 0x81E2 - Message not compatible with call state or not
implemented
User-User i = 0x00FEB4110180
Jan 10 12:29:26: ISDN Se0/0/1:15 Q931: TX -> RELEASE_COMP pd = 8
callref = 0xF400
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
More information about the cisco-voip
mailing list