[cisco-voip] CM 3.3(4) adding hardware MTP and CFB with same MAC

[Andrew Dignan]

Sorry, this is for 3.3(3) not 3.3(4) which doesn't have the "enhanced ios"
conference bridge and transcoder which can be configured with a name that
matches in IOS and CallManager.

I know I have done this in 3.3(3) before cuz I have a bunch of IOS configs
that has:

dspfarm transcoder maximum sessions 2
dspfarm confbridge maximum sessions 2

but I can't remember how to configure it in CM.

> I believe you'll want to use the new format for talking SCCP to CM.  Thes
> newer profile based format allows you to set a name that CM will
> recognize.
> Unfortunately I can't find the link that describes this.
>
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Andrew Dignan
> Sent: Thursday, January 12, 2006 11:27 PM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] CM 3.3(4) adding hardware MTP and CFB with same MAC
>
> Been so long since I added a hardware cfb and mtp instead of the enhanced
> IOS cfb/mtp.
>
> I am trying to add a hardware cfb and mtp.  The problem I am having is
> that
> obviously I will have the same MAC address for both because it will be the
> interface sccp is associated with.
>
> I can add the CFB but when I try to add the MTP with the same mac I get an
> error a device with the same MAC exists (CFB11111111111).  Shouldn't they
> be
> different because its prefixed with MTP?  What am I missing?
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>