[cisco-voip] turn up D-channel

[Voll, Scott]

Verizon did this to me once also.  They had installed the PRI and it
took me a week to get it up and running and they downed the PRI
D-Channel so they wouldn't keep getting alerts.  They had to fix it.  

 

Scott

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Brian Henry
Sent: Friday, January 13, 2006 9:45 AM
To: IT; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] turn up D-channel

 

Are all the interfaces up?

 

Controller x/x up

Serial x/x:23 up

voice-port x/x:23 up

 

do a "Show isdn status", this will let you know about L1-L3 information,
If you see "multiple frames established" then you are good to go.

 

Brian

 

________________________________

From: cisco-voip-bounces at puck.nether.net on behalf of IT
Sent: Fri 1/13/2006 12:00 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] turn up D-channel

Hi,

I have a 2801 with a PRI, and all seems configured correctly (I stole
most of the config from another gateway I have).
Verizon is telling me that my D-Channel is blocked. So I guess I need to
turn it up. Where can I check the status, and how do I turn it up?

Thanks,
Avidan


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060113/b4a6e41b/attachment.html