[cisco-voip] H323 call routing via GK

[Robin H]

I have one voice gateway running H323 and another gateway is running
CME. I want to save IDD cost with toll bypass but having problem with
call routing via gatekeeper.

Route-pattern config at CallManager:
28XX -> route to gatekeeper
11XX -> route to gatekeeper

 GK config:
 Zone local xxxx test.com 172.16.12.254
 Zone prefix xxxx 28.. gw-priority 10 JKT_1
 Zone prefix xxxx 28.. gw-priority 5 JKT_2
 Zone prefix xxxx 11.. gw-priority 10 BDG
 Zone prefix xxxx 6221……. gw-priority 10 JKT_1
 Zone prefix xxxx 6221……. gw-priority 5 JKT_2
 Gw-type-prefix 1#
 Bandwidth total zone xxxx 64

config at BDG router (CME):
translation-rule 1
 rule 1 ^90016221 6221
!
dial-peer voice 23 voip
 destination-pattern 90016221…….
 translate-outgoing called 1
 session target ras
 dtmf-relay h245-alphanumeric
 no vad
=========================

Info:
28XX is the extension in JKT site
11XX is the ext in BDG site running CME 3.2
JKT and BDG gateways are registered as H323 devices in CM 3.3 with
significant-digits = 4.


Dial Test from BDG:
-         Dial 28XX is working fine
-         Dial 11XX is working fine
-         Dial to 90016221XXXXXXX (toll bypass) always failed.

Plz enlighten me. thanks