[cisco-voip] H323 call routing via GK

[Philip Walenta]

Without seeing the rest of the CME dial-peers or a call trace makes it a
tough call.

It can't be said that voip peer you have listed is the one being matched
when the number is dialed.

I'd do a "show dialplan 90016221" and see what dial-peer the router thinks
it's matching.

Be aware that if you have any dial-peers with T in them, they won't show up
with this command.

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Robin H
Sent: Sunday, January 15, 2006 6:22 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] H323 call routing via GK

I have one voice gateway running H323 and another gateway is running CME. I
want to save IDD cost with toll bypass but having problem with call routing
via gatekeeper.

Route-pattern config at CallManager:
28XX -> route to gatekeeper
11XX -> route to gatekeeper

 GK config:
 Zone local xxxx test.com 172.16.12.254
 Zone prefix xxxx 28.. gw-priority 10 JKT_1  Zone prefix xxxx 28..
gw-priority 5 JKT_2  Zone prefix xxxx 11.. gw-priority 10 BDG  Zone prefix
xxxx 6221... gw-priority 10 JKT_1  Zone prefix xxxx 6221... gw-priority 5
JKT_2  Gw-type-prefix 1#  Bandwidth total zone xxxx 64

config at BDG router (CME):
translation-rule 1
 rule 1 ^90016221 6221
!
dial-peer voice 23 voip
 destination-pattern 90016221...
 translate-outgoing called 1
 session target ras
 dtmf-relay h245-alphanumeric
 no vad
=========================

Info:
28XX is the extension in JKT site
11XX is the ext in BDG site running CME 3.2 JKT and BDG gateways are
registered as H323 devices in CM 3.3 with significant-digits = 4.


Dial Test from BDG:
-         Dial 28XX is working fine
-         Dial 11XX is working fine
-         Dial to 90016221XXXXXXX (toll bypass) always failed.

Plz enlighten me. thanks

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip