[cisco-voip] H323 call routing via GK

Kevin Thorngren kthorngr at cisco.com
Sun Jan 15 14:50:12 EST 2006


You might need to change your Translation Rule to this:
translation-rule 1
  rule 1 ^90016221……. 6221

Please refer to this page for more info on Translation Rules:
http://www.cisco.com/en/US/partner/tech/tk652/tk90/ 
technologies_configuration_example09186a0080094681.shtml

Kevin

On Jan 15, 2006, at 7:21 AM, Robin H wrote:

> I have one voice gateway running H323 and another gateway is running
> CME. I want to save IDD cost with toll bypass but having problem with
> call routing via gatekeeper.
>
> Route-pattern config at CallManager:
> 28XX -> route to gatekeeper
> 11XX -> route to gatekeeper
>
>  GK config:
>  Zone local xxxx test.com 172.16.12.254
>  Zone prefix xxxx 28.. gw-priority 10 JKT_1
>  Zone prefix xxxx 28.. gw-priority 5 JKT_2
>  Zone prefix xxxx 11.. gw-priority 10 BDG
>  Zone prefix xxxx 6221……. gw-priority 10 JKT_1
>  Zone prefix xxxx 6221……. gw-priority 5 JKT_2
>  Gw-type-prefix 1#
>  Bandwidth total zone xxxx 64
>
> config at BDG router (CME):
> translation-rule 1
>  rule 1 ^90016221 6221
> !
> dial-peer voice 23 voip
>  destination-pattern 90016221…….
>  translate-outgoing called 1
>  session target ras
>  dtmf-relay h245-alphanumeric
>  no vad
> =========================
>
> Info:
> 28XX is the extension in JKT site
> 11XX is the ext in BDG site running CME 3.2
> JKT and BDG gateways are registered as H323 devices in CM 3.3 with
> significant-digits = 4.
>
>
> Dial Test from BDG:
> -         Dial 28XX is working fine
> -         Dial 11XX is working fine
> -         Dial to 90016221XXXXXXX (toll bypass) always failed.
>
> Plz enlighten me. thanks
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>




More information about the cisco-voip mailing list