[cisco-voip] No alerting tone on voip gateway

[Anthony Kouloglou]

It is h323 Scott.
I had to add "progress_ind setup enable 3" at the voip dial peer, 
because without this,
the alcatel phone could not hear the alerting either.
I have tried many comands on the pots dialpeer but NOTHING!!

Voll, Scott wrote:

> H323 or mgcp?  H323 in the dial peer you can add a command something 
> like progress indicator 3.  This fixed it for my PBX when I was 
> running h323.  IF it's mgcp, I'm not sure.
>
>  
>
> Scott
>
>  
>
> ------------------------------------------------------------------------
>
> *From:* cisco-voip-bounces at puck.nether.net 
> [mailto:cisco-voip-bounces at puck.nether.net] *On Behalf Of *Anthony 
> Kouloglou
> *Sent:* Thursday, January 19, 2006 8:16 AM
> *To:* cisco-voip at puck-nether.net
> *Subject:* [cisco-voip] No alerting tone on voip gateway
>
>  
>
> Hi all,
> i have a ccm ip network and a voip gateway which is connected with an 
> alcatel PBX with isdn Q-SIG.
> When i call an alcatel extension from the ip phone, i get no alerting 
> tone on the IPphone, although the alcatel phone is ringing (here is 
> the debugging of the isdn q931)
>
> *Mar  4 00:11:12.070: ISDN BR1/0 Q931: TX -> SETUP pd = 8  callref = 
> 0x0030
>         Bearer Capability i = 0x8090A3
>                 Standard = CCITT
>                 Transer Capability = Speech 
>                 Transfer Mode = Circuit
>                 Transfer Rate = 64 kbit/s
>         Channel ID i = 0xA98382
>                 Exclusive, Channel 2
>         Calling Party Number i = 0x0981, '125'
>                 Plan:Private, Type:Unknown
>         Called Party Number i = 0x80, '128'
>                 Plan:Unknown, Type:Unknown
>         Sending Complete
> *Mar  4 00:11:12.214: ISDN BR1/0 Q931: RX <- CALL_PROC pd = 8  callref 
> = 0x8030
>         Channel ID i = 0xA98382
>                 Exclusive, Channel 2
> **Mar  4 00:11:12.394: ISDN BR1/0 Q931: RX <- ALERTING pd = 8  callref 
> = 0x8030*
> *Mar  4 00:11:18.434: ISDN BR1/0 Q931: RX <- DISCONNECT pd = 8  
> callref = 0x0019
>         Cause i = 0x8590 - Normal call clearing
> *Mar  4 00:11:18.438: ISDN BR1/0 Q931: TX -> RELEASE pd = 8  callref = 
> 0x8019
>         Cause i = 0x8090 - Normal call clearing
> *Mar  4 00:11:18.490: ISDN BR1/0 Q931: TX -> DISCONNECT pd = 8  
> callref = 0x0030
>         Cause i = 0x8290 - Normal call clearing
> *Mar  4 00:11:18.558: ISDN BR1/0 Q931: RX <- RELEASE_COMP pd = 8  
> callref = 0x0019
> *Mar  4 00:11:18.774: ISDN BR1/0 Q931: RX <- RELEASE pd = 8  callref = 
> 0x8030
>         Cause i = 0x8190 - Normal call clearing
> *Mar  4 00:11:18.778: ISDN BR1/0 Q931: TX -> RELEASE_COMP pd = 8  
> callredial-peer cor custom
>
> If i call another external call iget alering tone!!!(here is the isdn 
> q931)
>
> *Mar  4 00:16:34.450: ISDN BR1/0 Q931: TX -> SETUP pd = 8  callref = 
> 0x0031
>         Bearer Capability i = 0x8090A3
>                 Standard = CCITT
>                 Transer Capability = Speech 
>                 Transfer Mode = Circuit
>                 Transfer Rate = 64 kbit/s
>         Channel ID i = 0xA98381
>                 Exclusive, Channel 1
>         Calling Party Number i = 0x0081, '210'
>                 Plan:Unknown, Type:Unknown
>         Called Party Number i = 0x80, '02310469300'
>                 Plan:Unknown, Type:Unknown
>         Sending Complete
> *Mar  4 00:16:34.606: ISDN BR1/0 Q931: RX <- CALL_PROC pd = 8  callref 
> = 0x8031
>         Channel ID i = 0xA98381
>                 Exclusive, Channel 1
> **Mar  4 00:16:36.386: ISDN BR1/0 Q931: RX <- ALERTING pd = 8  callref 
> = 0x8031 **
>         Progress Ind i = 0x8488 - In-band info or appropriate now 
> available *
> *Mar  4 00:16:38.638: ISDN BR1/0 Q931: RX <- CONNECT pd = 8  callref = 
> 0x8031
>         Progress Ind i = 0x8082 - Destination address is non-ISDN 
>         Connected Number i = 0x41833137383932333130343639333030
> *Mar  4 00:16:38.642: ISDN BR1/0 Q931: TX -> CONNECT_ACK pd = 8  
> callref = 0x0031
> *Mar  4 00:16:41.710: %ISDN-6-CONNECT: Interface BRI1/0:1 is now 
> connected to unknown
> *Mar  4 00:16:41.710: %ISDN-6-DISCONNECT: Interface BRI1/0:1  
> disconnected from unknown , call lasted 3 seconds
> *Mar  4 00:16:41.714: ISDN BR1/0 Q931: TX -> DISCONNECT pd = 8  
> callref = 0x0031
>         Cause i = 0x8290 - Normal call clearing
> *Mar  4 00:16:42.226: ISDN BR1/0 Q931: RX <- RELEASE pd = 8  callref = 
> 0x8031
>         Cause i = 0x8190 - Normal call clearing
> *Mar  4 00:16:42.230: ISDN BR1/0 Q931: TX -> RELEASE_COMP pd = 8  
> callref = 0x0031
>
>
> I know it has something to do with the progress indicator (there is 
> none in the first call) but do i have to fix it on the gateway or it 
> has somenthing to do with the PBX?
>
> Thanks
>
> Anthony
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060119/f6a0548e/attachment.html