[cisco-voip] No alerting tone on voip gateway

[Teodor Georgiev]

I do not think that the "progress_ind setup enable 3" is the right command here.
The Cisco is actually gettting alerting, but without a PI IE inside. 

Anthony,

try to do the following at the pots dial-peer:

progress_ind alert enable 8

It shall insert a PI with a value of 8 in the ALERT message.

  ----- Original Message ----- 
  From: Anthony Kouloglou 
  To: Voll, Scott 
  Cc: cisco-voip at puck-nether.net 
  Sent: Thursday, January 19, 2006 7:00 PM
  Subject: Re: [cisco-voip] No alerting tone on voip gateway


  It is h323 Scott.
  I had to add "progress_ind setup enable 3" at the voip dial peer, because without this,
  the alcatel phone could not hear the alerting either.
  I have tried many comands on the pots dialpeer but NOTHING!!

  Voll, Scott wrote: 
    H323 or mgcp?  H323 in the dial peer you can add a command something like progress indicator 3.  This fixed it for my PBX when I was running h323.  IF it's mgcp, I'm not sure.



    Scott




----------------------------------------------------------------------------

    From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Anthony Kouloglou
    Sent: Thursday, January 19, 2006 8:16 AM
    To: cisco-voip at puck-nether.net
    Subject: [cisco-voip] No alerting tone on voip gateway



    Hi all,
    i have a ccm ip network and a voip gateway which is connected with an alcatel PBX with isdn Q-SIG.
    When i call an alcatel extension from the ip phone, i get no alerting tone on the IPphone, although the alcatel phone is ringing (here is the debugging of the isdn q931)

    *Mar  4 00:11:12.070: ISDN BR1/0 Q931: TX -> SETUP pd = 8  callref = 0x0030 
            Bearer Capability i = 0x8090A3 
                    Standard = CCITT 
                    Transer Capability = Speech  
                    Transfer Mode = Circuit 
                    Transfer Rate = 64 kbit/s 
            Channel ID i = 0xA98382 
                    Exclusive, Channel 2 
            Calling Party Number i = 0x0981, '125' 
                    Plan:Private, Type:Unknown 
            Called Party Number i = 0x80, '128' 
                    Plan:Unknown, Type:Unknown 
            Sending Complete
    *Mar  4 00:11:12.214: ISDN BR1/0 Q931: RX <- CALL_PROC pd = 8  callref = 0x8030 
            Channel ID i = 0xA98382 
                    Exclusive, Channel 2
    *Mar  4 00:11:12.394: ISDN BR1/0 Q931: RX <- ALERTING pd = 8  callref = 0x8030
    *Mar  4 00:11:18.434: ISDN BR1/0 Q931: RX <- DISCONNECT pd = 8  callref = 0x0019 
            Cause i = 0x8590 - Normal call clearing
    *Mar  4 00:11:18.438: ISDN BR1/0 Q931: TX -> RELEASE pd = 8  callref = 0x8019 
            Cause i = 0x8090 - Normal call clearing
    *Mar  4 00:11:18.490: ISDN BR1/0 Q931: TX -> DISCONNECT pd = 8  callref = 0x0030 
            Cause i = 0x8290 - Normal call clearing
    *Mar  4 00:11:18.558: ISDN BR1/0 Q931: RX <- RELEASE_COMP pd = 8  callref = 0x0019
    *Mar  4 00:11:18.774: ISDN BR1/0 Q931: RX <- RELEASE pd = 8  callref = 0x8030 
            Cause i = 0x8190 - Normal call clearing
    *Mar  4 00:11:18.778: ISDN BR1/0 Q931: TX -> RELEASE_COMP pd = 8  callredial-peer cor custom

    If i call another external call iget alering tone!!!(here is the isdn q931)

    *Mar  4 00:16:34.450: ISDN BR1/0 Q931: TX -> SETUP pd = 8  callref = 0x0031 
            Bearer Capability i = 0x8090A3 
                    Standard = CCITT 
                    Transer Capability = Speech  
                    Transfer Mode = Circuit 
                    Transfer Rate = 64 kbit/s 
            Channel ID i = 0xA98381 
                    Exclusive, Channel 1 
            Calling Party Number i = 0x0081, '210' 
                    Plan:Unknown, Type:Unknown 
            Called Party Number i = 0x80, '02310469300' 
                    Plan:Unknown, Type:Unknown 
            Sending Complete
    *Mar  4 00:16:34.606: ISDN BR1/0 Q931: RX <- CALL_PROC pd = 8  callref = 0x8031 
            Channel ID i = 0xA98381 
                    Exclusive, Channel 1
    *Mar  4 00:16:36.386: ISDN BR1/0 Q931: RX <- ALERTING pd = 8  callref = 0x8031 
            Progress Ind i = 0x8488 - In-band info or appropriate now available 
    *Mar  4 00:16:38.638: ISDN BR1/0 Q931: RX <- CONNECT pd = 8  callref = 0x8031 
            Progress Ind i = 0x8082 - Destination address is non-ISDN  
            Connected Number i = 0x41833137383932333130343639333030
    *Mar  4 00:16:38.642: ISDN BR1/0 Q931: TX -> CONNECT_ACK pd = 8  callref = 0x0031
    *Mar  4 00:16:41.710: %ISDN-6-CONNECT: Interface BRI1/0:1 is now connected to unknown 
    *Mar  4 00:16:41.710: %ISDN-6-DISCONNECT: Interface BRI1/0:1  disconnected from unknown , call lasted 3 seconds
    *Mar  4 00:16:41.714: ISDN BR1/0 Q931: TX -> DISCONNECT pd = 8  callref = 0x0031 
            Cause i = 0x8290 - Normal call clearing
    *Mar  4 00:16:42.226: ISDN BR1/0 Q931: RX <- RELEASE pd = 8  callref = 0x8031 
            Cause i = 0x8190 - Normal call clearing
    *Mar  4 00:16:42.230: ISDN BR1/0 Q931: TX -> RELEASE_COMP pd = 8  callref = 0x0031


    I know it has something to do with the progress indicator (there is none in the first call) but do i have to fix it on the gateway or it has somenthing to do with the PBX?

    Thanks

    Anthony



------------------------------------------------------------------------------


  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060119/bbf893a0/attachment-0001.html