[cisco-voip] PI (Presentation Indicator) on CME

[Brian Henry]

Did you look at these commands
xxx-xxxx(config-dial-peer)#clid ?
  network-number  To provide Network Provided Number
  restrict        To restrict presentation of caller ID
  strip           To remove calling party number entirely


-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Sean Watkins
Sent: Thursday, January 19, 2006 2:59 PM
To: 'cisco-voip at puck.nether.net'
Subject: [cisco-voip] PI (Presentation Indicator) on CME

Hi,

I have bunch of 7960 phones, a 3660 running CME, and a few 5350/5300s
with
ISDN interfaces used to gateway to the PSTN.

I'm running into some odd problems with voicemail when either the
5350/5300
decides to set the Presentation Indicator (PI) to be Allowed/Private. 

Is there any way to force the PI to be a specific value all the time in
a
dial-peer?

Sean
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip