[cisco-voip] PI (Presentation Indicator) on CME

[Sean Watkins]

Interesting

Looks like these commands just affect the Calling Party ID?

Here is my setup. See the Redirecting Number i = '!', 0x0082, in setup #1,
this is what needs to change to what I have in #2.


Setup #1

Jan 19 14:54:01  831276: Jan 19 14:54:01 AST: ISDN Se3/1:23 Q931: TX ->
SETUP pd = 8  callref = 0x6BBD 
Jan 19 14:54:01 831277:        Bearer Capability i = 0x8090A2 
Jan 19 14:54:01  831278:                Standard = CCITT 
Jan 19 14:54:01  831279:                Transfer Capability = Speech  
Jan 19 14:54:01  831280:                Transfer Mode = Circuit 
Jan 19 14:54:01  831281:                Transfer Rate = 64 kbit/s 
Jan 19 14:54:01  831282:        Channel ID i = 0xA98384 
Jan 19 14:54:01  831283:                Exclusive, Channel 4 
Jan 19 14:54:01  831284:        Progress Ind i = 0x8183 - Origination
address is non-ISDN  
Jan 19 14:54:01  831285:        Calling Party Number i = 0xA1, 'X' 
Jan 19 14:54:01  831286:                Plan:ISDN, Type:National 
Jan 19 14:54:01  831287:        Called Party Number i = 0xA1, 'Y' 
Jan 19 14:54:01  831288:                Plan:ISDN, Type:National 
Jan 19 14:54:01 831289:        Redirecting Number i = '!', 0x0082, 'Z' 
Jan 19 14:54:01  831290:                Plan:ISDN, Type:National

I need it to look like

Setup #2

 19 15:09:00  832312: Jan 19 15:09:00 AST:   Transfering to voicemail 
Jan 19 15:09:00  832313: Jan 19 15:09:00 AST: ISDN Se3/0:23 Q931: TX ->
SETUP pd = 8  callref = 0x6BD8 
Jan 19 15:09:00  832314:        Bearer Capability i = 0x9090A2 
Jan 19 15:09:00 832315:                Standard = CCITT 
Jan 19 15:09:00  832316:                Transfer Capability = 3.1kHz Audio 
Jan 19 15:09:00  832317:                Transfer Mode = Circuit 
Jan 19 15:09:00  832318:                Transfer Rate = 64 kbit/s 
Jan 19 15:09:00  832319:        Channel ID i = 0xA98385 
Jan 19 15:09:00  832320:                Exclusive, Channel 5 
Jan 19 15:09:00  832321:        Progress Ind i = 0x8483 - Origination
address is non-ISDN  
Jan 19 15:09:00  832322:        Calling Party Number i = 0x2183, 'X1' 
Jan 19 15:09:00  832323:                Plan:ISDN, Type:National 
Jan 19 15:09:00  832324:        Called Party Number i = 0xA1, 'Y' 
Jan 19 15:09:00  832325:                Plan:ISDN, Type:National 
Jan 19 15:09:00  832326:        Redirecting Number i = 0x010081, 'Z2' 



Sean
 

-----Original Message-----
From: Brian Henry [mailto:Brian.Henry at apptis.com] 
Sent: Thursday, January 19, 2006 4:08 PM
To: Sean Watkins; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] PI (Presentation Indicator) on CME

Did you look at these commands
xxx-xxxx(config-dial-peer)#clid ?
  network-number  To provide Network Provided Number
  restrict        To restrict presentation of caller ID
  strip           To remove calling party number entirely


-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Sean Watkins
Sent: Thursday, January 19, 2006 2:59 PM
To: 'cisco-voip at puck.nether.net'
Subject: [cisco-voip] PI (Presentation Indicator) on CME

Hi,

I have bunch of 7960 phones, a 3660 running CME, and a few 5350/5300s with
ISDN interfaces used to gateway to the PSTN.

I'm running into some odd problems with voicemail when either the 5350/5300
decides to set the Presentation Indicator (PI) to be Allowed/Private. 

Is there any way to force the PI to be a specific value all the time in a
dial-peer?

Sean
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip