[cisco-voip] PSTN connection terminated before error message
Wes Sisk
wsisk at cisco.com
Thu Jan 26 15:38:15 EST 2006
try
convert-discpi-to-prog
from my cheat sheet:
CSCds78480 voice call convert-discpi-to-prog - convert disc w/pi to
progress w/ pi so phones hear message
/Wes
Mike Armstrong wrote:
> A user here inadvertently dialed a number in the same area code, but outside
> the local calling area -- i.e., she dialed 94411244 when she should have
> dialed 818634411244. (9-local, 8-LD). As soon as ring tone was heard on
> the 7940, the screen was wiped to an on-hook indication. Placing the same
> call on a directly connect PSTN station, you hear ring tone, then the
> intercept tones, then a message: "Your long-distance carrier cannot
> completeyour call as dialed...". Is there any way to configure CallManager
> (or, more likely, the router) to maintain the connection so that the user
> will hear the error message? This is, of course, repeatable, so I can get
> traces if needed.
>
> CCM 4.1(3)SR2
> 3640 c3640-is-mz.123-8.T5.bin
> H.323, PRI to Verizon
>
> Possibly relevant config snippets:
>
> interface Serial1/0:23
> no ip address
> no logging event link-status
> isdn switch-type primary-ni
> isdn incoming-voice voice
> isdn map address ^9[2-9]......$ plan unknown type unknown
> isdn map address ^9[2-9].........$ plan unknown type unknown
> isdn map address ^91[2-9].........$ plan unknown type unknown
> isdn map address ^9[49]11$ plan unknown type unknown
> isdn map address ^9011 plan unknown type unknown
> isdn map address ^81[2-9].........$ plan unknown type unknown
> !
> voice-port 1/0:23
> bearer-cap Speech
> !
> dial-peer voice 1023907 pots
> destination-pattern 9[2-9]......$
> port 1/0:23
> forward-digits all
> !
>
> Mike Armstrong
> UF/IFAS CREC
> Lake Alfred, FL
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
More information about the cisco-voip
mailing list