[cisco-voip] Cisco Wireless IP Phones and Aironet Access points

[James O'Farrell]

Hi,

I have tried using a Linksys AP for this it dose work fine but be aware
you should switch CDP off on the phone (If using CME it causes the
router to reboot when the phone registers with the AP). The other
drawback is if the AP gets busy you have no way of prioritising voice
traffic.


James O'Farrell

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Craig Ayliffe
Sent: 27 January 2006 00:21
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Cisco Wireless IP Phones and Aironet Access points

Hi,

My company is looking at getting a couple of Wireless IP phones.

Do the Cisco Wireless IP Phone 7920's require Cisco Aironet access
points, or can use generic access points?
If you don't use the Aironet's, what functionality will you lose?

Thanks,

--
Craig Ayliffe

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


ValueLink is a specialist service provider of financial data to the major UK and International centres. Our clients require reliable, accurate data with maximum coverage on a fixed time delayed basis. We work closely with each of our clients to provide a service which meets their specific requirements and maximises efficiency of their process. 

For further information visit our website @ www.valuelink.co.uk

CONFIDENTIALITY: The information in this e-mail and any attachment is confidential. It is intended only for the named recipient(s). If you are not a named recipient, please notify the sender immediately and do not read, use, copy or disseminate this information.

ValueLink Information Services Ltd accepts no liability whatsoever for any direct or consequential loss arising from the use, or reliance on, this e-mail or it's contents.