[cisco-voip] Re: Call Restriction issue during WAN outage

[Ciscozest]

Please ignore my previous email as the config was wrong. Kindly read though this one. Thank you.

I have problem to restrict some users from dialing IDD during WAN outage. My dial-patterns are:
9.001!, Partition = idd, RouteList = HQ-GW, predot
5XXX, Partition = toll, CSS = ld, RouteList = toll (routed to):
1 - GK RG = prefix 1#
2 - Local GW RG = Prefix digit = 90016221565

Phone A is in internal partition and CSS = hq-all (partitions: internal, local, toll, idd)
Phone B is in internal partition and CSS = hq-local (partitions: internal, local, toll)
Translation rule: 1#XXXX in hq-all partition, CSS = internal (partitions: internal), Called party number mask - XXXX

When my WAN link is up, I can dial 5XXX from any phone without problem. When my WAN link is down, dialing 5XXX will be 
routed through
local gateway as IDD (international) call. When the WAN outage happened, all my users with either hq-all or hq-local CSS 
were still able to reach 5XXX. By right phone B should fail to call 5XXX during WAN outage due to CSS restriction. Can I 
block Phone B from dialing that number only when my WAN link is down? My gatekeeper in in HQ site (local to CallManager 
servers). Plz help. thanks