[cisco-voip] Dial-Peer has "incoming called number ."

[Stu Packett]

I'm just going through all my gateways and I noticed that I have a
dial-peer with "incoming called-number ." (notice the singe dot at the
end).  What is the purpose of  a single dot for the incoming
called-number?  Thanks in advance.

dial-peer voice 9999 voip
 incoming called-number .
 voice-class codec 1
 dtmf-relay h245-alphanumeric
 no vad
--------------------------------------------------------

IRS Circular 230  Disclosure:  To ensure compliance with requirements imposed by the IRS, we inform you that any U.S. federal tax advice in this communication (including attachments) is not intended or written by Fenwick & West LLP to be used, and cannot be used, for the purpose of (i) avoiding penalties under the Internal Revenue Code or (ii) promoting, marketing, or recommending to another party any transaction or matter addressed herein.
--------------------------------------------------------

ATTENTION:
The information contained in this message may be legally privileged and confidential.  It is intended to be read only by the individual or entity to whom it is addressed or by their designee. If the reader of this message is not the intended recipient, you are on notice that any distribution of this message, in any form, is strictly prohibited.
 
If you have received this message in error, please immediately notify the sender and/or Fenwick & West LLP by telephone at (650) 988-8500 and delete or destroy any copy of this message.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060127/4cdfdedd/attachment.html