[cisco-voip] Dial-Peer has "incoming called number ."

[Stu Packett]

Thanks.  I forgot to mention that all my other incoming dial-peers have
four dots like:
incoming called-number ....
 
Since I already have a dial-peer with the .... dots, can I leave this
out and still be safe?

________________________________

From: Ortiz, Carlos [mailto:CORTIZ at broward.org] 
Sent: Friday, January 27, 2006 11:25 AM
To: Stu Packett; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Dial-Peer has "incoming called number ."



I'm sure someone will explain I better, but all your calls need and
incoming call leg and an outbound call leg.  The dial-peer you listed
below looks like it is intended to be the incoming call leg for all
destinations that don't have a more specific match.

 

Carlos

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Stu Packett
Sent: Friday, January 27, 2006 2:21 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Dial-Peer has "incoming called number ."

 

I'm just going through all my gateways and I noticed that I have a
dial-peer with "incoming called-number ." (notice the singe dot at the
end).  What is the purpose of  a single dot for the incoming
called-number?  Thanks in advance.

dial-peer voice 9999 voip 
 incoming called-number . 
 voice-class codec 1 
 dtmf-relay h245-alphanumeric 
 no vad 

________________________________

IRS Circular 230  Disclosure:  To ensure compliance with requirements
imposed by the IRS, we inform you that any U.S. federal tax advice in
this communication (including attachments) is not intended or written by
Fenwick & West LLP to be used, and cannot be used, for the purpose of
(i) avoiding penalties under the Internal Revenue Code or (ii)
promoting, marketing, or recommending to another party any transaction
or matter addressed herein. 

________________________________

ATTENTION:
The information contained in this message may be legally privileged and
confidential.  It is intended to be read only by the individual or
entity to whom it is addressed or by their designee. If the reader of
this message is not the intended recipient, you are on notice that any
distribution of this message, in any form, is strictly prohibited. 

  

If you have received this message in error, please immediately notify
the sender and/or Fenwick & West LLP by telephone at (650) 988-8500 and
delete or destroy any copy of this message. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060127/a54dd3d7/attachment.html