[cisco-voip] Dial-Peer has "incoming called number ."

[Ray Burkholder]

In recent ios versions, I've seen the four dots not always matched.  I've
had to start to use ^....$ as the match to force it to that dialpeer.
By using a debug dialpeer and a show dialpeer (iirc) command, you'll see
what dialpeers are in use for the active call legs.
 
  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Stu Packett
Sent: Friday, January 27, 2006 15:29
To: Ortiz, Carlos; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Dial-Peer has "incoming called number ."


Thanks.  I forgot to mention that all my other incoming dial-peers have four
dots like:
incoming called-number ....
 
Since I already have a dial-peer with the .... dots, can I leave this out
and still be safe?

  _____  

From: Ortiz, Carlos [mailto:CORTIZ at broward.org] 
Sent: Friday, January 27, 2006 11:25 AM
To: Stu Packett; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Dial-Peer has "incoming called number ."



I'm sure someone will explain I better, but all your calls need and incoming
call leg and an outbound call leg.  The dial-peer you listed below looks
like it is intended to be the incoming call leg for all destinations that
don't have a more specific match.

 

Carlos

 

  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Stu Packett
Sent: Friday, January 27, 2006 2:21 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Dial-Peer has "incoming called number ."

 

I'm just going through all my gateways and I noticed that I have a dial-peer
with "incoming called-number ." (notice the singe dot at the end).  What is
the purpose of  a single dot for the incoming called-number?  Thanks in
advance.

dial-peer voice 9999 voip 
 incoming called-number . 
 voice-class codec 1 
 dtmf-relay h245-alphanumeric 
 no vad 

  _____  

IRS Circular 230  Disclosure:  To ensure compliance with requirements
imposed by the IRS, we inform you that any U.S. federal tax advice in this
communication (including attachments) is not intended or written by Fenwick
& West LLP to be used, and cannot be used, for the purpose of (i) avoiding
penalties under the Internal Revenue Code or (ii) promoting, marketing, or
recommending to another party any transaction or matter addressed herein. 

  _____  

ATTENTION:
The information contained in this message may be legally privileged and
confidential.  It is intended to be read only by the individual or entity to
whom it is addressed or by their designee. If the reader of this message is
not the intended recipient, you are on notice that any distribution of this
message, in any form, is strictly prohibited. 

  

If you have received this message in error, please immediately notify the
sender and/or Fenwick & West LLP by telephone at (650) 988-8500 and delete
or destroy any copy of this message. 


-- 
Scanned for viruses & dangerous content at One Unified
<http://www.oneunified.net>  and is believed to be clean. 

-- 
Scanned for viruses and dangerous content at 
http://www.oneunified.net and is believed to be clean.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060127/1625b69e/attachment-0001.html