[cisco-voip] Catalyst 6608 T1 module

[Philip Walenta]

To my knowledge, the 6608 has never supported multiple TFTP servers.


  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Mendoza, Anthony R
Sent: Tuesday, January 31, 2006 4:03 PM
To: Cisco VoIP
Subject: [cisco-voip] Catalyst 6608 T1 module


All,
 
Is there a way to assign multiple TFTP servers in a config on a 6608 when
running CatOS and not using DHCP?  I find when I'm going a static IP
configuration that I can only assign a single TFTP server which doesn't give
me much failover in a situation where I lose a CCM and for some reason the
device resets (such as a power outage).  I'd be forced to go re-configure it
in order to receive it's configuration.  Any way around that hassle?
 
Thanks,
-Anthony

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060131/fc059e8a/attachment.html