[cisco-voip] Catalyst 6608 T1 module

[Matt Slaga (US)]

Use DHCP to push two TFTP servers, but use DHCP reservations to obtain
your "static" address.
 
 
________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Philip Walenta
Sent: Tuesday, January 31, 2006 5:14 PM
To: 'Mendoza, Anthony R'; 'Cisco VoIP'
Subject: RE: [cisco-voip] Catalyst 6608 T1 module


To my knowledge, the 6608 has never supported multiple TFTP servers.


________________________________

	From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Mendoza,
Anthony R
	Sent: Tuesday, January 31, 2006 4:03 PM
	To: Cisco VoIP
	Subject: [cisco-voip] Catalyst 6608 T1 module
	
	
	All,
	 
	Is there a way to assign multiple TFTP servers in a config on a
6608 when running CatOS and not using DHCP?  I find when I'm going a
static IP configuration that I can only assign a single TFTP server
which doesn't give me much failover in a situation where I lose a CCM
and for some reason the device resets (such as a power outage).  I'd be
forced to go re-configure it in order to receive it's configuration.
Any way around that hassle?
	 
	Thanks,
	-Anthony




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain confidential
and privileged information and is for use by the designated
addressee(s) named above only.  If you are not the intended addressee,
you are hereby notified that you have received this communication in
error and that any use or reproduction of this email or its contents is
strictly prohibited and may be unlawful.  If you have received this
communication in error, please notify us immediately by replying to
this message and deleting it from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060131/f7bd813c/attachment.html