[cisco-voip] IVR voip

[Carlos Lopez Fernandez]

Hi all,

I just make an application with VXML, and when I test it with an dial-peer pots, via ISDN it works well, but when I try to test it with a dialpeer voip, it doesn´t works the call finish and I don´t Know why.

Tis is the scenario:

1 router A cisco with a ISDN line, 
1 router B who runs the VXML

In router A:

dial-peer voice 1000 voip
 destination-pattern 1000
 session target ipv4:10.10.10.1
 dtmf-relay h245-alphanumeric
 codec g711ulaw
 no vad


In router B
dial-peer voice 1000 voip
 service acme
 destination-pattern 1000
 incoming called-number 1000
 dtmf-relay h245-alphanumeric
 codec g711ulaw
 no vad

Any ideas??

Thanks in advance

Carlos J.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060703/618166de/attachment-0001.html