[cisco-voip] CME 4.0 and after hours restrictions..

[Jim McBurnett]

Hi all,

I was wondering if I was the only one that thinks the CME4.0 manual is
wrong on call blocking...
ON CME 4.0, if you have a block pattern in place it affects the FXS
ports and the IP phones.
The book says it should not..

Anyone else seen this?

My config was simple--
I blocked 91 as the pattern.
I could not dial 918005551212 from the FXS ports.. I took it off and it
worked..
This is set for 1 min shy of 24 hours... So it can overridded....

My step is a TAC case, but just wanted a sanity check....

Later,
J