[cisco-voip] CME 4.0 and after hours restrictions..

[Kevin Thorngren]

Are these SCCP controlled FXS ports?  If so then I would say the call 
blocking feature of CME would be enforced since these ports are 
controlled by CME.  I don' have a way to test this at the moment 
though.

Kevin
On Jul 3, 2006, at 9:12 PM, Jim McBurnett wrote:

> Hi all,
>
> I was wondering if I was the only one that thinks the CME4.0 manual is
> wrong on call blocking...
> ON CME 4.0, if you have a block pattern in place it affects the FXS
> ports and the IP phones.
> The book says it should not..
>
> Anyone else seen this?
>
> My config was simple--
> I blocked 91 as the pattern.
> I could not dial 918005551212 from the FXS ports.. I took it off and it
> worked..
> This is set for 1 min shy of 24 hours... So it can overridded....
>
> My step is a TAC case, but just wanted a sanity check....
>
> Later,
> J
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>