[cisco-voip] Fax Machines

[Ed Leatherman]

With only "Clock source line" in the config, I had this:
router#sh network-clocks
  Network Clock Configuration
  ---------------------------
  Priority      Clock Source    Clock State     Clock Type

    11          Backplane       GOOD            PLL

  Current Primary Clock Source
  ---------------------------
  Priority      Clock Source    Clock State     Clock Type

    11          Backplane       GOOD            PLL

After adding the select statement I have this now:
(config)#do sh network-clocks
  Network Clock Configuration
  ---------------------------
  Priority      Clock Source    Clock State     Clock Type

     1          T1 0/0/0        GOOD            T1
    11          Backplane       GOOD            PLL

  Current Primary Clock Source
  ---------------------------
  Priority      Clock Source    Clock State     Clock Type

     1          T1 0/0/0        GOOD            T1

On 7/5/06, Jason Aarons (US) <jason.aarons at us.didata.com> wrote:
>
>  I'm curious what a show network-clocks says before you add the
> network-clock-select.
>
>
>
> I'm seeing the default is to clock from the backplane, even when the show
> controller says "clock source line".
>
>
>  ------------------------------
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Ed Leatherman
> *Sent:* Wednesday, July 05, 2006 10:34 AM
> *To:* Anthony Kouloglou
>
> *Cc:* ciscovoip
> *Subject:* Re: [cisco-voip] Fax Machines
>
>
>
> There is a network-clock-participate statement in the config (assuming its
> default, I didnt put it there) but no select statement. i'll take a look,
> thanks for the tip!
>
> On 7/5/06, *Anthony Kouloglou* <akoul at dataways.gr> wrote:
>
> Hi Ed,
> i had this problem and opened a TAC and solved it!!
>
>  Total Data (last 14 15 minute intervals):
>
> >       1 Line Code Violations, 4 Path Code Violations,
>
> >       *425 Slip Secs,* 0 Fr Loss Secs, 1 Line Err Secs, 0 Degraded Mins,
>
>
>
> >      *427 Errored Secs*, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail
>
> Secs
>
> >
>
> >
>
> > You need to add the following in the router config -
>
> >
>
> > network-clock-participate wic 0
>
> > network-clock-select 1 e1 0/0
>
> >
>
> > Reload router after applying changes !!!!
>
> >
>
> > This forces the WIC and AIM to participate in the system clocking domain
>
>
>
>
> --
>
> Ed Leatherman
> IP Telephony Coordinator
> West Virginia University
> Telecommunications and Network Operations
>
>  ------------------------------
>
>
> *
> Disclaimer:
>
> This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the
> designated addressee(s) named above only. If you are not the
> intended addressee, you are hereby notified that you have received
> this communication in error and that any use or reproduction of
> this email or its contents is strictly prohibited and may be
> unlawful. If you have received this communication in error, please
> notify us immediately by replying to this message and deleting it
> from your computer. Thank you.
> *
>



-- 
Ed Leatherman
IP Telephony Coordinator
West Virginia University
Telecommunications and Network Operations
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060705/ef0e7466/attachment-0001.html