[cisco-voip] 1760 not recognizing VICs

[Ted Nugent]

http://www.cisco.com/en/US/products/hw/routers/ps221/products_tech_note09186a00800c3399.shtml


--- Ted Nugent <tednugent69 at yahoo.com> wrote:

> Yup thats your issue... once you install a PVDMs
> they
> will show up.
> 
> --- Curt Shaffer <cshaffer at gmail.com> wrote:
> 
> > I just got a Cisco 1760 for a lab. I have a dual
> FXO
> > and a dual FXS that I
> > have been using with no issues in my 1750. When I
> > put the modules in the
> > 1760 they are not being recognized. There is a
> > constant amber light on each
> > of them and if I do a show interfaces they do not
> > show up. I have voice plus
> > IOS on it and there are two PVDM slots on the
> board
> > but there are no chips.
> > I am assuming this is the issue. I am correct in
> > this assumption or should
> > the routers notice them anyway?
> > 
> >  
> > 
> > Thanks
> > 
> >  
> > 
> > Curt
> > 
> > > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> >
> https://puck.nether.net/mailman/listinfo/cisco-voip
> > 
> 
> 
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam
> protection around 
> http://mail.yahoo.com 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com