[cisco-voip] 1760 not recognizing VICs

[Schmelkin, Richard]

Curt,

 

This issue can most certainly be a dsp issue.  But maybe other causes.

 

These cards need dsp's in order to function.

 

So you'll need to get some dsp's onto that router motherboard. 

 

What version IOS? Are these Vic2 or just Vic?

 

Older Vic cards, pre Vic2 may not be recognized by the IOS.

 

For example, there is a Vic-2FXS and a Vic2-2FXS.

 

Can you be more specific as to the version of IOS and they type of cards
you are using as outlined above.

 

I just ran into this issue the other night at a client I was doing some
work for. 

 

Check this link:

 

http://www.cisco.com/en/US/partner/products/hw/routers/ps259/products_te
ch_note09186a00800e73f6.shtml#platform

 

See if your cards are compatible.

 

The issue your describing can be caused by either or both.

 

Can you provide a show hardware and a show version output please?

 

Thanks,

Rich

 

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Curt Shaffer
Sent: Thursday, July 06, 2006 7:37 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] 1760 not recognizing VICs

 

I just got a Cisco 1760 for a lab. I have a dual FXO and a dual FXS that
I have been using with no issues in my 1750. When I put the modules in
the 1760 they are not being recognized. There is a constant amber light
on each of them and if I do a show interfaces they do not show up. I
have voice plus IOS on it and there are two PVDM slots on the board but
there are no chips. I am assuming this is the issue. I am correct in
this assumption or should the routers notice them anyway?

 

Thanks

 

Curt



This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail and delete the message and any attachments from your system.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060706/3ca915d5/attachment.html