[cisco-voip] Proper way to set outgoing Caller-ID with CME 3.4(0)

[Arkadiusz Kuczorski]

There are  several ways you can do this.Translation pattern is one of 
them. The most preferable, i think, is dial-plan pattern,
in your case:
dialplan-pattern 1 5055555800 extension-length 3 extension-pattern 8..
The secondary number has nothing to do with calling ID, it assign 
secondary number to telephony line (voice port).


Cheers
Arek

Patrick Mowry wrote:

>Hello,
>  I have a Call Manager Express install with 3 digit extensions assigned
>to the phones and a PRI to the outside world.  For the outbound
>Calling-Station-ID the 3 digit extension is being sent.  I tried a setup
>like:
>
>telephony-service
> calling-number local secondary
>!
>ephone-dn  1  dual-line
>number 802 secondary 5055555802
>
>but the 3 digits are still being sent.  This morning I was going to
>build a translation pattern to prefix the missing 7 digits on all
>outbound dial-peers, but I thought I should check for the correct way to
>do things.
>
>Thanks,
>
>-Patrick
>
>_______________________________________________
>cisco-voip mailing list
>cisco-voip at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
>  
>