[cisco-voip] Call Manager 4.1(3) MGCP Gateway Analog FXO Caller-ID

[Philip Walenta]

This has been on the wish-list for quite some time.

Works with the older FXO M1 2 port variety.

Works extremely well with the newer 4 port FXO card.

Both in H323 mode only. 

> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net 
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ted Nugent
> Sent: Monday, July 10, 2006 1:30 PM
> To: Greg Arthmann; cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] Call Manager 4.1(3) MGCP Gateway 
> Analog FXO Caller-ID
> 
> CID is only supported in H323 mode and only with a
> VIC-2FXO-M1 or higher. It seemed crazy to me when I first ran 
> into this as well.
> 
> 
> --- Greg Arthmann <garthmann at data-corporation.com>
> wrote:
> 
> > Is analog FXO Caller-ID in CallManager 4.1(3)with a
> > 2811 MGCP Gateway running 12.4x IOS a supported feature ?
> > 
> > 
> > Greg Arthmann
> > Network Consultant
> > Phone (786)554-2958
> > www.data-corporation.com
> > "Cisco IP Telephony Partner" 
> > 
> > 
> > 
> > 
> > 
> > 
> > > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> > 
> 
> 
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around 
> http://mail.yahoo.com 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip