[cisco-voip] VG248 constantly rebooting

[Lelio Fulgenzi]

We are having a problem where one of our VG248s is sometimes constantly, sometimes occassionaly rebooting. We have replaced it twice and have swapped the UPS but troubles still persist.

The logs don't show much and we're not sure what the problem might be. We're guessing it's one of the devices attached to the switch and we have a few leads, but I'm wondering if anyone out there has run into a problem where a device was causing the unit to reload. We have another VG248 with the same code and types of devices plugged into the same UPS so we're pretty sure it's an end device.

Also, is there any extra information contained in the SNMP traps and SYSLOG?

What was curious, and what we are investigating are three ports that register off-hook but the status says call ended on the next screen.

--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"I can eat fifty eggs." "Nobody can eat fifty eggs."
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060711/57bacc8a/attachment-0001.html