[cisco-voip] VG248 constantly rebooting

[omar parihuana]

Hi,

Pls, copy you "sh ver" after rebooting... there is the reason for
system returned...

Rgds.

On 7/11/06, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
>
> We are having a problem where one of our VG248s is sometimes constantly,
> sometimes occassionaly rebooting. We have replaced it twice and have swapped
> the UPS but troubles still persist.
>
> The logs don't show much and we're not sure what the problem might be. We're
> guessing it's one of the devices attached to the switch and we have a few
> leads, but I'm wondering if anyone out there has run into a problem where a
> device was causing the unit to reload. We have another VG248 with the same
> code and types of devices plugged into the same UPS so we're pretty sure
> it's an end device.
>
> Also, is there any extra information contained in the SNMP traps and SYSLOG?
>
> What was curious, and what we are investigating are three ports that
> register off-hook but the status says call ended on the next screen.
>
> --------------------------------------------------------------------------------
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> "I can eat fifty eggs." "Nobody can eat fifty eggs."
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>


-- 
Omar E.P.T
-----------------
Certified Networking Professionals make better Connections!