[cisco-voip] QSIG: Display name decoding fails
Voll, Scott
Scott.Voll at wesd.org
Tue Jul 11 12:46:57 EDT 2006
What about changing the plan type? My Qsig link is Private national.
Scott
-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Dietmar
Sent: Tuesday, July 11, 2006 9:39 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] QSIG: Display name decoding fails
Hi all,
I have an ISO-QSIG connection between a MGCP controlled 2821 (backhauled
to
CCM 4.1(3)) and a Tenovis PBX.
When someone places a call from the Tenovis towards the 2821,
Callmanager
seems to be unable to decode the display name (CNAM) of the calling
party.
However, the trace below shows that it is included within the facility.
Can anyone tell me what is going wrong there?
Thanks, Dietmar
000727: Jun 28 14:41:03.983: ISDN Se0/0/0:15 Q931: RX <- SETUP pd = 8
callref
= 0x004F
Bearer Capability i = 0x8090A3
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA18381
Preferred, Channel 1
Facility i = 0x9FAA068001008201008B0100A10D0201480201290305008E
000000A16C02014A0201553064820900400800000000000086
0101A854304006092B0C02876D0B0E884CE033E013C0013EE1
0EA10C0A0102120737333931353032E10CC107008000000000
00C30102E20CC10700D40000000000C30101E300301006092B
0C02876D0B0E884D0303008000A10F02014C02010080075465
6E6F766973
Facility i = 0x9FAA068001008201008B0102A10802014B0201540500A113
02014902013B300B30090A01050A01030A0104
Calling Party Number i = 0x0080, '3700'
Plan:Unknown, Type:Unknown
Called Party Number i = 0x80, '8999'
Plan:Unknown, Type:Unknown
Shift to Codeset 4
Codeset 4 IE 0x31 i = 0x80
High Layer Compat i = 0x9181
--
E-Mail: db7td at gmx.de
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
More information about the cisco-voip
mailing list