[cisco-voip] QSIG: Display name decoding fails

[Dietmar]

Yes, I have already tried this. Unfortunately, it did not help. I think the 
problem is the long facility. The display name is located at the end of it. 
Maybe Callmanager can not decode everything and stops at some point in the 
middle...

Dietmar

> What about changing the plan type?  My Qsig link is Private national.
>
> Scott
>
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Dietmar
> Sent: Tuesday, July 11, 2006 9:39 AM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] QSIG: Display name decoding fails
>
> Hi all,
>
> I have an ISO-QSIG connection between a MGCP controlled 2821 (backhauled
> to
> CCM 4.1(3)) and a Tenovis PBX.
>
> When someone places a call from the Tenovis towards the 2821,
> Callmanager
> seems to be unable to decode the display name (CNAM) of the calling
> party.
> However, the trace below shows that it is included within the facility.
>
> Can anyone tell me what is going wrong there?
>
> Thanks, Dietmar
>
>
>
> 000727: Jun 28 14:41:03.983: ISDN Se0/0/0:15 Q931: RX <- SETUP pd = 8
> callref
> = 0x004F
>         Bearer Capability i = 0x8090A3
>                 Standard = CCITT
>                 Transfer Capability = Speech
>                 Transfer Mode = Circuit
>                 Transfer Rate = 64 kbit/s
>         Channel ID i = 0xA18381
>                 Preferred, Channel 1
>         Facility i = 0x9FAA068001008201008B0100A10D0201480201290305008E
>                      000000A16C02014A0201553064820900400800000000000086
>                      0101A854304006092B0C02876D0B0E884CE033E013C0013EE1
>                      0EA10C0A0102120737333931353032E10CC107008000000000
>                      00C30102E20CC10700D40000000000C30101E300301006092B
>                      0C02876D0B0E884D0303008000A10F02014C02010080075465
>                      6E6F766973
>         Facility i = 0x9FAA068001008201008B0102A10802014B0201540500A113
>                      02014902013B300B30090A01050A01030A0104
>         Calling Party Number i = 0x0080, '3700'
>                 Plan:Unknown, Type:Unknown
>         Called Party Number i = 0x80, '8999'
>                 Plan:Unknown, Type:Unknown
>         Shift to Codeset 4
>         Codeset 4 IE 0x31  i = 0x80
>         High Layer Compat i = 0x9181

-- 
E-Mail: db7td at gmx.de