[cisco-voip] QSIG: Display name decoding fails
Ryan Ratliff
rratliff at cisco.com
Tue Jul 11 13:01:16 EDT 2006
Have you looked at the CCM trace? CCM will show the decoded Facility
IE in the trace.
-Ryan
On Jul 11, 2006, at 12:58 PM, Dietmar wrote:
Yes, I have already tried this. Unfortunately, it did not help. I
think the
problem is the long facility. The display name is located at the end
of it.
Maybe Callmanager can not decode everything and stops at some point
in the
middle...
Dietmar
> What about changing the plan type? My Qsig link is Private national.
>
> Scott
>
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Dietmar
> Sent: Tuesday, July 11, 2006 9:39 AM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] QSIG: Display name decoding fails
>
> Hi all,
>
> I have an ISO-QSIG connection between a MGCP controlled 2821
> (backhauled
> to
> CCM 4.1(3)) and a Tenovis PBX.
>
> When someone places a call from the Tenovis towards the 2821,
> Callmanager
> seems to be unable to decode the display name (CNAM) of the calling
> party.
> However, the trace below shows that it is included within the
> facility.
>
> Can anyone tell me what is going wrong there?
>
> Thanks, Dietmar
>
>
>
> 000727: Jun 28 14:41:03.983: ISDN Se0/0/0:15 Q931: RX <- SETUP pd = 8
> callref
> = 0x004F
> Bearer Capability i = 0x8090A3
> Standard = CCITT
> Transfer Capability = Speech
> Transfer Mode = Circuit
> Transfer Rate = 64 kbit/s
> Channel ID i = 0xA18381
> Preferred, Channel 1
> Facility i =
> 0x9FAA068001008201008B0100A10D0201480201290305008E
>
> 000000A16C02014A0201553064820900400800000000000086
>
> 0101A854304006092B0C02876D0B0E884CE033E013C0013EE1
>
> 0EA10C0A0102120737333931353032E10CC107008000000000
>
> 00C30102E20CC10700D40000000000C30101E300301006092B
>
> 0C02876D0B0E884D0303008000A10F02014C02010080075465
> 6E6F766973
> Facility i =
> 0x9FAA068001008201008B0102A10802014B0201540500A113
> 02014902013B300B30090A01050A01030A0104
> Calling Party Number i = 0x0080, '3700'
> Plan:Unknown, Type:Unknown
> Called Party Number i = 0x80, '8999'
> Plan:Unknown, Type:Unknown
> Shift to Codeset 4
> Codeset 4 IE 0x31 i = 0x80
> High Layer Compat i = 0x9181
--
E-Mail: db7td at gmx.de
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
More information about the cisco-voip
mailing list