[cisco-voip] QSIG: Display name decoding fails
Dietmar
db7td at gmx.de
Tue Jul 11 13:05:22 EDT 2006
Ah, this is a very good idea! I will check this as soon as possible. Thank
you!
Dietmar
> Have you looked at the CCM trace? CCM will show the decoded Facility
> IE in the trace.
>
> -Ryan
>
> On Jul 11, 2006, at 12:58 PM, Dietmar wrote:
>
> Yes, I have already tried this. Unfortunately, it did not help. I
> think the
> problem is the long facility. The display name is located at the end
> of it.
> Maybe Callmanager can not decode everything and stops at some point
> in the
> middle...
>
> Dietmar
>
> > What about changing the plan type? My Qsig link is Private national.
> >
> > Scott
> >
> > -----Original Message-----
> > From: cisco-voip-bounces at puck.nether.net
> > [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Dietmar
> > Sent: Tuesday, July 11, 2006 9:39 AM
> > To: cisco-voip at puck.nether.net
> > Subject: [cisco-voip] QSIG: Display name decoding fails
> >
> > Hi all,
> >
> > I have an ISO-QSIG connection between a MGCP controlled 2821
> > (backhauled
> > to
> > CCM 4.1(3)) and a Tenovis PBX.
> >
> > When someone places a call from the Tenovis towards the 2821,
> > Callmanager
> > seems to be unable to decode the display name (CNAM) of the calling
> > party.
> > However, the trace below shows that it is included within the
> > facility.
> >
> > Can anyone tell me what is going wrong there?
> >
> > Thanks, Dietmar
> >
> >
> >
> > 000727: Jun 28 14:41:03.983: ISDN Se0/0/0:15 Q931: RX <- SETUP pd = 8
> > callref
> > = 0x004F
> > Bearer Capability i = 0x8090A3
> > Standard = CCITT
> > Transfer Capability = Speech
> > Transfer Mode = Circuit
> > Transfer Rate = 64 kbit/s
> > Channel ID i = 0xA18381
> > Preferred, Channel 1
> > Facility i =
> > 0x9FAA068001008201008B0100A10D0201480201290305008E
> >
> > 000000A16C02014A0201553064820900400800000000000086
> >
> > 0101A854304006092B0C02876D0B0E884CE033E013C0013EE1
> >
> > 0EA10C0A0102120737333931353032E10CC107008000000000
> >
> > 00C30102E20CC10700D40000000000C30101E300301006092B
> >
> > 0C02876D0B0E884D0303008000A10F02014C02010080075465
> > 6E6F766973
> > Facility i =
> > 0x9FAA068001008201008B0102A10802014B0201540500A113
> > 02014902013B300B30090A01050A01030A0104
> > Calling Party Number i = 0x0080, '3700'
> > Plan:Unknown, Type:Unknown
> > Called Party Number i = 0x80, '8999'
> > Plan:Unknown, Type:Unknown
> > Shift to Codeset 4
> > Codeset 4 IE 0x31 i = 0x80
> > High Layer Compat i = 0x9181
--
E-Mail: db7td at gmx.de
More information about the cisco-voip
mailing list