[cisco-voip] my digits are being cut off going out the gw

[Ryan Ratliff]

You need to look in CM not at the gateway.  The gateway only sends  
what CM tells it to.

-Ryan

On Jul 14, 2006, at 4:46 PM, James Grace wrote:

For some reason we are trying to dial 011 420 737 731130 and we get a  
message you have not dial enogh digits.  We dial this number from  
another phone system and it works just fine.  In the debug the called  
party number is getting cut off.  What could be causing this



The number they are trying to dial is: 011 420 737 731130     Here  
are the

debugs when I had them make a test call:



Jul 14 18:33:08.238: ISDN Se0/0/0:23 Q931: TX -> SETUP pd = 8   
callref = 0x0FFA



        Bearer Capability i = 0x8090A2

                Standard = CCITT

                Transfer Capability = Speech

                Transfer Mode = Circuit

                Transfer Rate = 64 kbit/s

        Channel ID i = 0xA98383

                Exclusive, Channel 3

        Display i = 'Emerson'

        Calling Party Number i = 0x0181, '8906'

                Plan:ISDN, Type:Unknown

        Called Party Number i = 0xA1, '0114207377311'

                Plan:ISDN, Type:National

Jul 14 18:33:08.282: ISDN Se0/0/0:23 Q931: RX <- CALL_PROC pd = 8   
callref = 0x FFA

        Channel ID i = 0xA98383

                Exclusive, Channel 3

Jul 14 18:33:08.574: ISDN Se0/0/0:23 Q931: RX <- PROGRESS pd = 8   
callref =

0x8

FA

        Progress Ind i = 0x8A81 - Call not end-to-end ISDN, may have  
in-band inf



Jul 14 18:33:12.862: ISDN Se0/0/1:23 Q931: RX <- CONNECT pd = 8   
callref = 0x90 D Jul 14 18:33:12.870: ISDN Se0/0/1:23 Q931: TX ->  
CONNECT_ACK pd = 8  callref = x100D Jul 14 18:33:17.286: ISDN  
Se0/0/0:23 Q931: TX -> DISCONNECT pd = 8  callref = 0 0FFA

        Cause i = 0x8090 - Normal call clearing Jul 14 18:33:17.310:  
ISDN Se0/0/0:23 Q931: RX <- RELEASE pd = 8  callref = 0x8F A Jul 14  
18:33:17.322: ISDN Se0/0/0:23 Q931: TX -> RELEASE_COMP pd = 8 callref  
= 0x0FFA Jul 14 18:33:36.658: ISDN Se0/0/0:23 Q931: RX <- DISCONNECT  
pd = 8  callref = 0 012E

        Cause i = 0x8090 - Normal call clearing Jul 14 18:33:36.678:  
ISDN Se0/0/0:23 Q931: TX -> RELEASE pd = 8  callref =

0x81

E

Jul 14 18:33:36.706: ISDN Se0/0/0:23 Q931: RX <- RELEASE_COMP pd = 8  
callref = 0x012E Jul 14 18:33:44.642: ISDN Se0/0/1:23 Q931: TX ->  
DISCONNECT pd = 8  callref = 0 100C

        Cause i = 0x8090 - Normal call clearing Jul 14 18:33:44.670:  
ISDN Se0/0/1:23 Q931: RX <- RELEASE pd = 8  callref = 0x90 C Jul 14  
18:33:44.678: ISDN Se0/0/1:23 Q931: TX -> RELEASE_COMP pd = 8 callref  
= 0x100C Jul 14 18:33:46.162: ISDN Se0/0/1:23 Q931: TX -> SETUP pd =  
8  callref = 0x100E





_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip