[cisco-voip] Setting up local DSP resources on 2821

[Aman Chugh]

http://www.cisco.com/en/US/partner/products/ps6441/products_configuration_guide_chapter09186a0080541bf3.html

This Link should help.

- Aman


On 7/18/06, Voll, Scott <Scott.Voll at wesd.org> wrote:
>
>   To my understanding you do have to have multiple profiles…. One for
> xcoding and one for conferencing.
>
>
>
> You apply the resourses via your Media Resourse group and lists.
>
>
>
> Hope that helps.
>
>
>
> Scott
>
>
>  ------------------------------
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Wydra, Jason
> *Sent:* Tuesday, July 18, 2006 8:51 AM
>
> *To:* cisco-voip at puck.nether.net
> *Subject:* [cisco-voip] Setting up local DSP resources on 2821
>
>
>
> Does anyone have a good example config on how to set this up? I have two
> onboard PVDM2 32 channel modules in my 2821. I want the local router to hit
> the gateway first for MTP, Conference and Transcoding. Then CCM 4.1.3. I
> have the Cisco procedure but I'm wondering if I really need to configure
> everything they are suggesting. Looks like it might require multiple dspfarm
> profiles for all the services I want to provide.
>
>
>
> Thanks,
>
>
>
> *Jason Wydra*
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060718/a6a79875/attachment-0001.html