[cisco-voip] Setting up local DSP resources on 2821

[Voll, Scott]

To my understanding you do have to have multiple profiles.... One for
xcoding and one for conferencing.

 

You apply the resourses via your Media Resourse group and lists.

 

Hope that helps.

 

Scott

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Wydra, Jason
Sent: Tuesday, July 18, 2006 8:51 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Setting up local DSP resources on 2821

 

Does anyone have a good example config on how to set this up? I have two
onboard PVDM2 32 channel modules in my 2821. I want the local router to
hit the gateway first for MTP, Conference and Transcoding. Then CCM
4.1.3. I have the Cisco procedure but I'm wondering if I really need to
configure everything they are suggesting. Looks like it might require
multiple dspfarm profiles for all the services I want to provide.

 

Thanks,

 

Jason Wydra

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060718/b1e89908/attachment.html