[cisco-voip] Setting up local DSP resources on 2821

[Erik Erasmus (E)]

Jason



I need to do something exactly like this but will only get to it in a
couple of days. If I do get something before the group comes up with
something I will share it



Erik Erasmus





________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Wydra, Jason
Sent: 18 July 2006 05:51 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Setting up local DSP resources on 2821



Does anyone have a good example config on how to set this up? I have
two onboard PVDM2 32 channel modules in my 2821. I want the local
router to hit the gateway first for MTP, Conference and Transcoding.
Then CCM 4.1.3. I have the Cisco procedure but I'm wondering if I
really need to configure everything they are suggesting. Looks like it
might require multiple dspfarm profiles for all the services I want to
provide.



Thanks,



Jason Wydra





~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This e-mail and its contents are subject to the Telkom SA Limited
e-mail legal notice available at
http://www.telkom.co.za/TelkomEMailLegalNotice.PDF
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060718/83652e7f/attachment.html