[cisco-voip] Site that has numbers that are same as 9.@ RoutePattern

[Lelio Fulgenzi]

  ----- Original Message ----- 
  From: Ted Nugent 
  To: Jason Aarons (US) ; ciscovoip 
  Sent: Wednesday, July 19, 2006 11:34 AM
  Subject: Re: [cisco-voip] Site that has numbers that are same as 9.@ RoutePattern


  Also, I would never use the .@ in my dialplan... it's
  like creating and ACL and then putting a permit ip any
  any at the end.. but to each his own.

Why do you say that? We use the @ patterns exclusively and have had no problems. With the appropriate route filters we are able to filter anything we want.

I found using the @ patterns were extremely easy as opposed to having to learn to use the cisco'esque reg.exp. technique, especially when we were first starting out. I was a little worried that we went this way and after asking a few Cisco engineers, there seemed to be no problems building a dialplan based on it. I had originally been worried about memory, but they said it should be OK.

Anyways, just wondering...

Lelio
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060719/b903168c/attachment-0001.html