[cisco-voip] IPCC Route Point busy after 4 calls

[Jonathan Charles]

Oops, only 5... Hey, does each call use more than one channel? I just
tested it and I was only able to stack 3 calls in queue....

I am changing this to 150.... and it works! That was the problem, thanks!



Jonathan

On 7/19/06, Ryan Ratliff <rratliff at cisco.com> wrote:
> What is the max number of channels on the Media group?
>
> -Ryan
>
> On Jul 19, 2006, at 3:51 PM, Jonathan Charles wrote:
>
> Seeing this in the log on IPCC:
>
> 636: Jul 19 13:59:42.265 CDT %MIVR-SS_TEL-5-CTIPG_ROUTE_EVENT:CTI Port
> Group route event: Route Session=[1500/(P1-jtapi)
> GCID=(3,5624)->INVALID]->DISCONNECTED,Route Address=1500,Failure
> reason=CTI accept timer expires after 4015 ms, end route
> connection,Exception=java.lang.InterruptedException
>
> The first four calls connect fine...
>
>
> On 7/19/06, Jonathan Charles <jonvoip at gmail.com> wrote:
> > New install, CCM4.1(3)sr3b, IPCC 3.5(3)sr3...
> >
> > CTI RP has maximum calls 5000 and the script application has 100
> > calls, yet after four calls in queue, the fifth call to the RP gets a
> > busy signal.
> >
> > What am I missing?
> >
> >
> >
> >
> > Jonathan
> >
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>