[cisco-voip] CCM 5 on VMWare Server 1.0.0

[Jonathan Charles]

First off, you need 72GB of HD.

Second, go here:

http://www.vmware.com/community/message.jspa?messageID=399465

Third, good luck getting a license to make it all work... if you
figure this part out, share it with the group.



Jonathan

On 7/19/06, Serg <c719562 at gmail.com> wrote:
> Hi All,
>          I'm hoping you can give me some tips on how to install CCM 5.0.2 or
> 5.0.3 on VMWare Server 1.0.0.   I have uncessfully tried to install CCM
> 5.0.2.1000-3 and 5.0.3-1000-2.   The installation appears to complete
> properly but I get the following message when the server tries to restart:
>
> " the installation has failed and must be restarted to recover from the
> failure.   You may dump diagnostic information at this time to a USB storage
> key.  Would you like to dump diagnostic information"
>
> I have used the following settings for my Virtual Server
>
> Guest Operating System = RedHat Enterprise Linux 4 (I have also tried RedHat
> Enterprise Linux 3)
> HardDisk = 20GB SCSI  (I have also tried 20GB IDE)
>  Memory = 2048MB
> Ethernet = Bridged
> Processors = 1
>
> Should I perhaps be using VMWare GSX?
>
> Thanks,
>
> Sergio
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>