[cisco-voip] CCM 5 on VMWare Server 1.0.0

[Nick Marus]

Your Cisco team can provide you with demo licencing. It's a small
quanity, but works for a lab or customer demo.

Nick

On 7/19/06, Jonathan Charles <jonvoip at gmail.com> wrote:
> First off, you need 72GB of HD.
>
> Second, go here:
>
> http://www.vmware.com/community/message.jspa?messageID=399465
>
> Third, good luck getting a license to make it all work... if you
> figure this part out, share it with the group.
>
>
>
> Jonathan
>
> On 7/19/06, Serg <c719562 at gmail.com> wrote:
> > Hi All,
> >          I'm hoping you can give me some tips on how to install CCM 5.0.2 or
> > 5.0.3 on VMWare Server 1.0.0.   I have uncessfully tried to install CCM
> > 5.0.2.1000-3 and 5.0.3-1000-2.   The installation appears to complete
> > properly but I get the following message when the server tries to restart:
> >
> > " the installation has failed and must be restarted to recover from the
> > failure.   You may dump diagnostic information at this time to a USB storage
> > key.  Would you like to dump diagnostic information"
> >
> > I have used the following settings for my Virtual Server
> >
> > Guest Operating System = RedHat Enterprise Linux 4 (I have also tried RedHat
> > Enterprise Linux 3)
> > HardDisk = 20GB SCSI  (I have also tried 20GB IDE)
> >  Memory = 2048MB
> > Ethernet = Bridged
> > Processors = 1
> >
> > Should I perhaps be using VMWare GSX?
> >
> > Thanks,
> >
> > Sergio
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> >
> >
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>


-- 
Nick Marus
nmarus at gmail.com