[cisco-voip] FXS port stuck in S_WAIT_RELEASE state

[Kris Seraphine]

It's a 2821 running 12.3(11)XL1.

This is a CME system.  The FXS port is used for a fax machine.  Calls are
routed directly from the PRI to the FXS port via a POTs dial peer.  I don't
have access to the config right now but I could post it later.

I'm fairly certain there's not a config problem but in any case I'm more
interested in knowing if there's a way to reset the port when this happens
(besides reloading the router).


On 7/24/06, Damon Watson <damon.watson at gmail.com> wrote:
>
> Can you post your software/hardware version?  Also, the gateway config
> and/or any debugs you may have captured.
>
> Thanks.
>
> @lia$
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>


-- 
kris seraphine
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060727/1c252184/attachment.html