[cisco-voip] FXS port stuck in S_WAIT_RELEASE state

[Ryan Ratliff]

How about a shut/no-shut on the voice-port?

-Ryan

On Jul 27, 2006, at 11:44 AM, Kris Seraphine wrote:

It's a 2821 running 12.3(11)XL1.

This is a CME system.  The FXS port is used for a fax machine.  Calls  
are routed directly from the PRI to the FXS port via a POTs dial  
peer.  I don't have access to the config right now but I could post  
it later.

I'm fairly certain there's not a config problem but in any case I'm  
more interested in knowing if there's a way to reset the port when  
this happens (besides reloading the router).


On 7/24/06, Damon Watson <damon.watson at gmail.com> wrote:
Can you post your software/hardware version?  Also, the gateway  
config and/or any debugs you may have captured.

Thanks.

@lia$


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip





-- 
kris seraphine
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip