[cisco-voip] FXS port stuck in S_WAIT_RELEASE state

[Israel Lang]

I opened a case with TAC and they said it was probably a software bug. I
upgraded and the problem hasn't resurfaced for a few days. Where as before I
was rebooting the router 2-3 times a day.

On 7/27/06, Ryan Ratliff <rratliff at cisco.com> wrote:
>
> How about a shut/no-shut on the voice-port?
>
> -Ryan
>
> On Jul 27, 2006, at 11:44 AM, Kris Seraphine wrote:
>
> It's a 2821 running 12.3(11)XL1.
>
> This is a CME system.  The FXS port is used for a fax machine.  Calls
> are routed directly from the PRI to the FXS port via a POTs dial
> peer.  I don't have access to the config right now but I could post
> it later.
>
> I'm fairly certain there's not a config problem but in any case I'm
> more interested in knowing if there's a way to reset the port when
> this happens (besides reloading the router).
>
>
> On 7/24/06, Damon Watson <damon.watson at gmail.com> wrote:
> Can you post your software/hardware version?  Also, the gateway
> config and/or any debugs you may have captured.
>
> Thanks.
>
> @lia$
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
>
>
> --
> kris seraphine
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>



-- 
Have a great day!!!!!!!!!!
zephy316_gmail.com

Replace the _ with an @ symbol
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060727/0c75ea99/attachment.html