[cisco-voip] have a router that sometime loses the config

[James Grace]

We have a gw srst router that will lose the config sometime when it gets
powered down.  Never seen this before.  Reg is to 0x2102.  this does not
happen all the time.  

 

DPNH2821GW#show version 

Cisco IOS Software, 2800 Software (C2800NM-ADVIPSERVICESK9-M), Version
12.4(8), RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2006 by Cisco Systems, Inc.

Compiled Mon 15-May-06 14:54 by prod_rel_team

 

ROM: System Bootstrap, Version 12.4(1r) [hqluong 1r], RELEASE SOFTWARE (fc1)

 

DPNH2821GW uptime is 2 days, 4 hours, 59 minutes

System returned to ROM by reload at 15:20:20 UTC Tue Jul 25 2006

System restarted at 15:21:21 UTC Tue Jul 25 2006

System image file is "flash:c2800nm-advipservicesk9-mz.124-8.bin"

 

If you require further assistance please contact us by sending email to

export at cisco.com.

 

Cisco 2821 (revision 53.51) with 247808K/14336K bytes of memory.

Processor board ID FTX1023A21Q

2 Gigabit Ethernet interfaces

24 Serial interfaces

1 terminal line

2 Channelized T1/PRI ports

2 Virtual Private Network (VPN) Modules

1 cisco service engine(s)

DRAM configuration is 64 bits wide with parity enabled.

239K bytes of non-volatile configuration memory.

62720K bytes of ATA CompactFlash (Read/Write)

 

Configuration register is 0x2102

 

DPNH2821GW#

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060727/2a4c94c3/attachment.html