[cisco-voip] Need Help : CCM 3.3 / AD integration ERROR afterchange the AD password

[Ryan Ratliff]

You'll need to talk with somebody with more AD knowledge than I about  
your replication issue.

For CM if you mean to find out what user CM is using to authenticate  
to the directory (the directory manager account) then look in the  
registry on the publisher at HKLM\software\cisco systems, inc. 
\directory configuration\MgrDn

-Ryan

On Jul 31, 2006, at 11:54 AM, Ranjan Babu .G wrote:

Hi Rayan,

Yes , user hasn't replicated to the DC CM .How resolve this.And How to
find out which account used to created to enable the callManager to
access the
directory


Can you not find any users or it only the new one that's not showing up?

	>>Able to see old users but not the new one

Is the new user in the same AD OU as the ones that show up?
	>> No

-----Original Message-----
From: Ryan Ratliff [mailto:rratliff at cisco.com]
Sent: Monday, July 31, 2006 9:07 PM
To: Ranjan Babu .G
Cc: Voll, Scott; cisco-voip at puck.nether.net
Subject: Re: Need Help : CCM 3.3 / AD integration ERROR afterchange the
AD password

Can you not find any users or it only the new one that's not showing up?

Is the new user in the same AD OU as the ones that show up?

-Ryan

On Jul 31, 2006, at 11:29 AM, Ranjan Babu .G wrote:

Hi ,

Thanks Rayan ,Scott

Followed  the  steps To change the password. After these steps we
created a test user in AD and same has not reflected in CCM user list .

My command marked as >>

Regards,
Ranjan



Step 2 Enter the command, CCMPWDChanger
>> Done >>

Step 3 In the Administrator Password field, enter the password of the
user that was created to enable Cisco CallManager to access the
directory.

>> Given the new password of AD domain Admin .How to find out which
account used to created to enable the callManager to access the
directory >>

>> If I select CCMAdministrator user -given msg user not found .We are
using administrator account for admin CCM server .>>

Step 4 Click Next.

Step 5 From the User ID drop-down list box, choose the user CCMSysUser

>> Done >>

Step 6 In the New Password field, enter the CCMSysUser password.

>> Done >>