[cisco-voip] Meetme questions

[Voll, Scott]

Sh Diag is not supported on Motherboard.

This is a ACT card on a CMM blade in my cat 65xx.

Scott

PS.  1 and 2 Bummer ;-(

-----Original Message-----
From: Fedorov, Konstantin [mailto:kfedor at amt.ru] 
Sent: Wednesday, May 03, 2006 6:53 AM
To: Voll, Scott; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Meetme questions

Hi, Scott

I  think

1. No
2. No
3. what kind of pvdm do you use ?  send show diag


-----------------------
Sincerely Yours,
Konstantin Fedorov

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Voll, Scott
Sent: Wednesday, May 03, 2006 5:29 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Meetme questions

I have a IOS resource I use for Meetme conferences. I have three
questions:

1. Can you setup a password on the meetme conference?
2. Is their a way from inside the conference to know how many people are
in the conference?  IE> #2 says 5 participates kind of idea.
3. I have the following config on an ACT card and I have max
participates set to 8.  Can I up that to lets say 15 or 20 with out
issue?

mediacard 1
 resource-pool Ad-Hoc dsps 2
 resource-pool transcodeMcMinnville dsps 2
!
!
sccp local GigabitEthernet1/0
sccp ccm 10.200.102.36 identifier 1
sccp ccm 10.200.102.35 identifier 2
sccp
!
sccp ccm group 1
 associate ccm 1 priority 1
 associate ccm 2 priority 2
 associate profile 1 register CFB001192b75643
 associate profile 2 register MTP001192b75643
!
dspfarm
!
dspfarm profile 1 conference adhoc
 codec g711ulaw packetization-period 30
 codec g711alaw packetization-period 30
 codec g729r8 packetization-period 30
 codec g729ar8 packetization-period 30
 codec g723r63 packetization-period 30
 codec g723r53 packetization-period 30
 associate resource-pool Ad-Hoc
!

Thanks

Scott

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip